1 - 2 of 2 Posts

1,883 Posts
Discussion Starter · #1 ·
Here at Premier, we have been performing paint protection film installations since 1997. At a time when no training courses were available, this craft was self taught to the core members at Premier. These members are still at Premier today and continuously honing in on this skill set.

The options today for paint protection film services are typically between precut installers and custom artisans. Most installers on the field use pre-cut templates. Very few perform custom applications, especially to the level where it is distinguishable to the pre-cuts.

It must also be noted that not all custom installers are equal. An inexperienced custom installer can create quite a bit of damage to the paint by cutting right through the film and onto the underlying surface.

Below is a 991 we just completed fully protecting all surfaces with a clear bra / paint protection film. Here are the process photos:

1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.