Luxury4Play.com banner

1 - 19 of 19 Posts

·
Registered
Joined
·
1,405 Posts
Discussion Starter #1
We are quite excited about the project we have going here at RDB. Customer has a pre 2006 Range Rover that we are converting to a 2010+ model. He had a Startech front lip on his original bumper that he wanted to keep on his car. Obviously the older StarTech lip which looks great cannot fit the newer bumpers. We also don't think any of the lips on the market look too great on the 2010 Range Rover bumpers. So we decided to go ahead and custom fit/mold it to a 2010+ front bumper. We are almost there with the process and think its going to be one of the cleanest/aggressive looking front bumpers around! By now you guys know we dont only mess around with simple body kits, we make our own! The imagination and skills here are limitless!!





5630 W Pico Blvd. Los Angeles, CA 90019
323-933-5630| [email protected]| www.RDBLA.com
http://www.RDreambodyshop.com








 

·
Registered
Joined
·
1,405 Posts
Discussion Starter #4
Front end for now.

We decided to make some vents on the sides of the front bumper, will post pictures in a few.


 

·
Registered
Joined
·
119 Posts
Nice.
Is the L322 matte grey, or black?
Tx
 

·
Registered
Joined
·
225 Posts
This Rover is one wrapped by DBX in LA... Wasn't he trying to sell it a while back? I saw it listed on eBay up in North Hollywood. Nonetheless, should look great!
 

·
Registered
Joined
·
1,405 Posts
Discussion Starter #10
Here is the bumper almost completed, we added the side vents like the Overfinch style on the sides. Plenty of people fail at even molding the proper kit for a car, here we molded a kit that is not even made for this bumper!

We might also be adding (customer choice) an LED strip to the lower sides of the lip.








5630 W Pico Blvd. Los Angeles, CA 90019
323-933-5630| [email protected]| www.RDBLA.com
http://www.RDreambodyshop.com








 

·
Registered
Joined
·
984 Posts
Very nice guys! Gonna look HAM ;)
 

·
Registered
Joined
·
1,405 Posts
Discussion Starter #16
Looks badd man....any other pictures? headlight pic?
The headlights are a bit tricky, the wiring is pretty much done. Some special resistor's need to be ordered as the ones we have in stock (which are already special high ones) are not cutting it. We have done quite a few 2005, 2006 + conversions but on this 04 there are some different issues. Rear bumper is almost done, deleting the reflector's and molding the Startech attachment the proper way.
 

·
Registered
Joined
·
1,405 Posts
Discussion Starter #18 (Edited)
So here are the bumpers on the car (they are primered right now). This is a 2004 to 2010+ conversion! Once again real custom work by RDB, not just a purchased body kit...

Front bumper was pretty much cut in half and modified.

Rear bumper had the previous Startech attachment which wasn't molded on correctly, so we went ahead and made it flush. We also closed up the reflector spots as per request of the customer.

You will also notice modified headlights, which we opened up and painted inside.










 

·
Registered
Joined
·
1,799 Posts
damn, that looks sick. how much damage would the conversion cost me?!?! gonna buy the new 6-series and keep the rr for long term.
 
1 - 19 of 19 Posts
Top