How do you determine the optimal cutout dimensions where the X pipe halves meet? Eyeball it? I think the size and shape must significantly impact whether you get good velocity and scavenging vs. increased turbulence.
Gallardo Nera TT Project started!
14
I have started on my Nera TT project. I will be doing the fabrication and Justin from Tuning Concepts will be helping me with the ECU work.
I will be posting updated pictures here as the work progresses.
Before the tearing the car apart
![]()
ECU setup and flying lead harness
![]()
Justin from Tuning Concepts working on the wiring harness.
![]()
Labeling all the wires
![]()
Half of the wiring harness finished up! Ready to install into the car.
![]()
ECU mount fabricated
![]()
ECU mounted safely behind the passenger kick panel.
![]()
Starting to wire in the aftermarket ECU to the stock ECU
![]()
![]()
Starting on the turbo kit
![]()
![]()
![]()
![]()
![]()
I will be posting updated pictures here as the work progresses.
Before the tearing the car apart
ECU setup and flying lead harness
Justin from Tuning Concepts working on the wiring harness.
Labeling all the wires
Half of the wiring harness finished up! Ready to install into the car.
ECU mount fabricated
ECU mounted safely behind the passenger kick panel.
Starting to wire in the aftermarket ECU to the stock ECU
Starting on the turbo kit
1 - 2 of 138 Posts
1 - 2 of 138 Posts
