Luxury4Play.com banner

Gallardo Nera TT Project started!

45258 Views 137 Replies 83 Participants Last post by  ag02m5
14
I have started on my Nera TT project. I will be doing the fabrication and Justin from Tuning Concepts will be helping me with the ECU work.
I will be posting updated pictures here as the work progresses.

Before the tearing the car apart



ECU setup and flying lead harness



Justin from Tuning Concepts working on the wiring harness.



Labeling all the wires



Half of the wiring harness finished up! Ready to install into the car.



ECU mount fabricated



ECU mounted safely behind the passenger kick panel.



Starting to wire in the aftermarket ECU to the stock ECU





Starting on the turbo kit









See less See more
1 - 4 of 138 Posts
Thanks for the info. Whats funny to me is that I stopped by SW's showroom and when I was walking around I noticed a supra driving towards the other building next to his place. I did not know that BL was right next to Elite. LOL they had the orange one there already with the TT set up and that was back in January of last year IIRC

View attachment 56173 View attachment 56174
Boostlogic is no longer located behind Elite, they have since then moved to their new location down the street.
Wish the wastegates would run their own dump tube instead of being circulated back into the exhaust tips but to each his own. Awesome fab work! Can't wait to hear her running.
Where are going to run the dump tube? All the kits out so far do the same thing as there is nowhere to exit a dump pipe without cutting a hole in the diffuser.
You also have to remember the earlier Gallardo 5L motors are weaker than the 5.2L LP560/570 motors.
Are LP560s, 560hp (est) at the crank or flywheel?
Crank/Flywheel basically the same thing and yes.
1 - 4 of 138 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top