1 - 10 of 10 Posts

288 Posts
Discussion Starter #1 (Edited)

I have many plans this year, and I am at a fork in the road. I can either keep the S2k and continue to mod it, or sell it and move to my next platform. Placed a deposit on my Elise on 30 JAN 12 and need the S2000 sold before I can complete the transaction!

I know one of your Ferrari guys needs a trainer car for the kid!

Year: 2005
Make: Honda
Model: S2000
Miles :76,000
2 Seater
F22C 2.2L VTEC

Last Dyno: 300WHP/240tq (good for another 40+hp in a fair weather tune)

Modified Greddy turbo kit
Ported hotside of turbo to prevent boost-creep with open exhaust
RC 550CC injectors
Walbro 255 Fuel pump
Greddy oil filter re-location
Greddy RS BOV
AEM Electric Boost control solenoid wired to AEM EMS
Valve cover and spark plate getting re-powder coated right now.
Oil return bung getting re-located to timing chain cover right now.
AEM Dry Intake filter
All IC piping and FMIC Powder coated Gloss Black
Electric 2.5" cutout in place of cat.
GM 3-bar map awaiting install

Cobra-R replicas 18x9+22F and 18x10+24R
Nankang NS-II 225/35/18F and 275/40/18R
Megan Track Pro 18way coilovers w/ pillowball mounts
Suspension set at -2.4* Camber front and -2.7* camber rear.
SR48 "Rainbow" Lug nuts
Alignments by Olathe Honda (Frank Anconda)

Mugen Replica top
OEM Front Latches, Bolt-in rear
Custom 3/8" Lexan rear glass
ASM Rear fender flares, OEM 1/4 panels removed and re-seamed underneath. Flares installed with Rivi-nuts and Bolts for re-move ability.
Custom flared OEM front fenders, Flared FULLY into bumper (Not normally done)
ASM Front bumper, also modified to match fender flare work
APR Fully Carbon Splitter with stabilizer bars.
CR Clear side-markers.
OEM rear bumper flared to match ASM Flares.
RX7 Chaser carbon side diffusers
Windows tinted 20% Formula One Ceramic film
Cut OEM hood mod.
Tail lights tinted
OEM AP1 deck lid Spoiler

Custom wrapped radio door lid (removable)
Custom short shifter and CR shift knob
Pioneer Premier Head unit
Custom USB port molded into dash, connect to headunit.
GARMIN NUVI 550 on custom dash mount, hidden wiring.
AEM Data-stream 19 in 1 gauge connected to the AEM EMS
Custom fiberglass box molded to toolwell, 10" Sub
Upgraded Low beam HID Ballasts and retrofitted High beam HID ballasts.

The Good:
ALL bodywork, Suspension, wheels, tires, alignments, and engine work was done in the last 12 months. (Over $20k in labor/parts last year)
Oil changed done every 90days/5k miles with Mobile 1 10W30 and Mobile 1 Filters.
Car was driven the first winter I had it, but has not been the last 2. Car is parked INDOORS under a car cover this winter, has NOT touched salt!
Even though the car is SLAMMED it DOES still have fender liners, and ONLY rubs with fresh tires by a hair in the rear, and does NOT affect function.

The Bad:
Drivers side side diffuser has damage to the gel-coat from hitting a spike strip coming off base one day, been told its re-parable, however I have just been looking for a replacement (these are no-longer made)
Front splitter has some VERY fine spider-webbing in a small 2"x4" area from hitting a possum, really not visible but want to be upfront.
Antenna not installed, though I have it.
Carfax might show an incident from earlier this year, right when I get the car back from the body shop there was a hit-and run on it in a parkinglot. damage was 100% limited to the bumper cover and headlight. NO frame damage at all! Bumper was re-paired by the same body shop (Kelly Williams Auto Body in Bucyrus KS) that did all of the bodywork previously and fixed it 100%
Light curb rash on the front passengers wheel, will be repairing next time I get tires. Some on rear pass as well.
ONLY mechanical problems I ever had was the COMMON TCT rattle which is repaired and a bad battery which was just replaced with a new one.


576 Posts
NICE S2000! Good luck with the sale :)

2,464 Posts
I really like the S2000 with hard tops.

288 Posts
Discussion Starter #6
Thanks much guys!
first 24hrs down on the ebay auction, 725 views and 10 watchers!

288 Posts
Discussion Starter #8

288 Posts
Discussion Starter #9
SOLD~ Thanks much everyone for the support! She is now moving to PA! Buyer picks up on Thursday. NO parts were removed so no, I'm not selling anything!
1 - 10 of 10 Posts