Luxury4Play.com banner

1 - 10 of 10 Posts

·
Registered
Joined
·
346 Posts
Discussion Starter #1
THE MISSION: remove wetsand marks, buffer marks /light holograms , improve exterior appearance.

Material used in correction:
- red cutting pad meg with meg 105 on flex da - 2 passes on wetsand areas , removed with mineral spirits
- green LC light cutting pad with optimum hyper compound on flex da, removed with IPA
- 3m ultrafina on 3m blue pad with flex da , removed with ipa.
- 2 coats of opti-seal

the damage before ( swirls, wetsand)


damage after:




wetsand before:




wetsand after:


light holo on hood:


Pictures from process:
Tape everywhere



the rear bumper was the last one touched




ready to go in the sun


















 

·
Registered
Joined
·
346 Posts
Discussion Starter #8
How'd you like following the 105 with the Optimum Hyper?
is not one of my favorite combo , but in this case it did the job. of course 3m ultrafina was the last polishing step.

optimum hyper has less cut than 105.
 
1 - 10 of 10 Posts
Top