I have more bikes then I do room. I had this bike custom built to match one of my race boats. It has been sitting in my toy room of the house for a few years and it is time to go. It's a sin not to be riden! It has about 600 miles and I don't even ride it.
Time to go! I can't even tell you how much I put in this thing!
$18,000
2007 Chopper Nations Nitrous Superbike well over $50k invested. Only 600 miles
Custom paint with pearls, candies, flake and chameleon paints cost over $6,000 to paint. It is absolutely gorgeous. It has won all 8 shows it was entered in. 3 best of shows! The bike model is called the twister due to the unique twisted frame which is the trademark of Chopper nations.
TP121 engine show quality polished with triple chromed diamond cut heads. If you ask anybody that knows choppers, they will tell you TP engineering are the best chopper engines you can buy. The engine alone with diamond cut heads are $11,450.
This bike is built with the best of everything. Triple chromed 6 speed transmission. Chrome cone air cleaner, Nitrous (NOS) system, belt drive, big wheel kit 290 x 18” rear, full LED light system, led brake light, Xenon head light, Ostrich seat, all stainless steel braided hoses, The rake is 45 Degrees In The Neck, 7 Degrees In The Trees Front End -
This bike has been parked on display inside my home.
Engine info
Show Polished Pro-Series® motors are assembled with the highest quality American-made components Include TP Engineering’s chrome billet pro-vent rocker boxes chrome billet cam cover patented billet oil pump forged flat-top pistons CNC-ported heads forged steel roller rocker arms stainless steel valves American-made tappet blocks single-fire ignition and Mikuni 45mm carburetors 121" motor has a 10.4:1 compression ratio Manual compression releases are installed All assembled Pro-Series engines are pre-run to ensure consistent quality and performance right out of the box Available in polished and show-polished finish Polished motors have polished crankcases tappet blocks cylinder bases cylinder and head fins and spark plug area Show polished motors have polished crankcases tappet blocks cylinders heads carburetor and intake manifold Made in the U.S.A.
http://www.choppernations.eu/gallery/nosbike.html
![Image]()
![Image]()
![Image]()
![Image]()
![Image]()
![Image]()
![Image]()
![Image]()
![Image]()
![Image]()
![Image]()
![Image]()
Time to go! I can't even tell you how much I put in this thing!
$18,000
2007 Chopper Nations Nitrous Superbike well over $50k invested. Only 600 miles
Custom paint with pearls, candies, flake and chameleon paints cost over $6,000 to paint. It is absolutely gorgeous. It has won all 8 shows it was entered in. 3 best of shows! The bike model is called the twister due to the unique twisted frame which is the trademark of Chopper nations.
TP121 engine show quality polished with triple chromed diamond cut heads. If you ask anybody that knows choppers, they will tell you TP engineering are the best chopper engines you can buy. The engine alone with diamond cut heads are $11,450.
This bike is built with the best of everything. Triple chromed 6 speed transmission. Chrome cone air cleaner, Nitrous (NOS) system, belt drive, big wheel kit 290 x 18” rear, full LED light system, led brake light, Xenon head light, Ostrich seat, all stainless steel braided hoses, The rake is 45 Degrees In The Neck, 7 Degrees In The Trees Front End -
This bike has been parked on display inside my home.
Engine info
Show Polished Pro-Series® motors are assembled with the highest quality American-made components Include TP Engineering’s chrome billet pro-vent rocker boxes chrome billet cam cover patented billet oil pump forged flat-top pistons CNC-ported heads forged steel roller rocker arms stainless steel valves American-made tappet blocks single-fire ignition and Mikuni 45mm carburetors 121" motor has a 10.4:1 compression ratio Manual compression releases are installed All assembled Pro-Series engines are pre-run to ensure consistent quality and performance right out of the box Available in polished and show-polished finish Polished motors have polished crankcases tappet blocks cylinder bases cylinder and head fins and spark plug area Show polished motors have polished crankcases tappet blocks cylinders heads carburetor and intake manifold Made in the U.S.A.
http://www.choppernations.eu/gallery/nosbike.html
