Luxury4Play.com banner

1 - 14 of 14 Posts

·
Registered
Joined
·
81 Posts
Discussion Starter #1
This particular Edizione Technica Superleggera was featured in our VF760 brochure recently along with another black 2013 LP570 Supercharged SL.

The car was brought directly to our facility from Lamborghini Newport Beach with only 50 miles on the ODO. This is the owner's 2nd VF supercharged Gallardo.

We will be updating this thread as pictures and information become available.






Still fresh from the factory
 

·
Registered
Joined
·
81 Posts
Discussion Starter #2
Out with the OEM.







Because the kit is 100% bolt-on, the motor does not need to removed to install the supercharger.

Twin Front-mounted radiators and Air-to-water cooling system up next...
 

·
Registered
Joined
·
81 Posts
Discussion Starter #4
Front mounted Heat Exchanger Installation


Twin front mounted Bar and Plate heat exchangers for maximum surface area.

Passenger side is shown installed w/OEM shroud and water lines connected

Driver side is shown below without the OEM shroud and Cold side outlet not yet connected



Illustration of water flow through Passenger side radiator w/custom mounting bracket installed.


The bracket and assembly shown below was engineered to allow our radiator to fit with the factory engine radiator and the A/C condenser within the OEM shroud


Installed




Air-to-water cooling system diagram



 

·
Registered
Joined
·
81 Posts
Discussion Starter #7 (Edited)
Custom MAF housings with K&N air filters assembled


Although very simple looking pieces, countless hours and resources went into creating our VF-Spec custom harmonic dampener and auxiliary alternator drive pulley. Putting together simple billet pulleys was not enough. Precision engineered and perfectly balanced, these pieces come together to provide factory-like drivability and feel at whatever RPM you are driving at.


Ready for S/C assembly to be installed




Once the water lines for the cooling system are plugged into the fittings above (pictured with caps) The inlet and final touches are all that remain.
 

·
Registered
Joined
·
81 Posts
Discussion Starter #9
With all of the major parts installed, all that's left are the final touches on the Supercharger assembly.

Custom MAF housings installed in airbox


Vacuum lines fitted and airbox connected to supercharger inlet



Final installation all tied up!


Videos will be up soon!
 

·
Registered
Joined
·
170 Posts
cost?
 
1 - 14 of 14 Posts
Top