Thread: FS RICHARD MILLE RM11 DUBAIL LIMITED EDITION

FOR SALE

Richard Mille
Model Name: RM-11 Dubail Limited Edition of 30
Model Ref #: RM-11

Condition: Like New - box and papers
Gender: Mens
Movement: Richard Mille CALIBER RM 011-S
POWER RESERVE
Circa 55 hours without chronograph running.
Actual power reserve results will depend on the period of time the chronograph is utilized.

WATCHCASE
This was the subject of an entire year of research and development. With regard to the production of each case, 68 different stamping operations are required for the three main components (bezel,middle section and case back). The machine tooling process requires 8 days of adjusting the machines for the bezel, 5 days for the middle section and 5 days for the case back.
Prior to this process, developing a methodology for carrying out this series of operations took
120 hours, the drawings for the tools 130 hours, and implemention 180 hours.Each rough case involves 202 separate machining operations.The design and execution of the watch demonstrates a complete conceptual approach to the movement, case and dial. As a result, everything has been constructed according to an extremely rigorous specification, in the manner of the analytical engineering methods used in the design of Formula 1 racing cars where the chassis and the engine are developed in complete harmony. For example, a casing ring is no longer used and the movement is mounted on chassis mounting rubbers (ISO SW) fixed by 4 titanium screws. Features such as these are evidence of uncompromising
workmanship. The tripartite case is water resistant to 50 meters, ensured by three Nitril O-ring seals. The case is assembled with 16 spline screws in grade 5 titanium and abrasion resistant washers in copper-nickel-zinc alloy.

BOTTOM PLATE, BRIDGES AND BALANCE COCK MADE OF TITANIUM
The manufacture of these components in grade 2 titanium with black PVD coating allows the whole assembly to be given great rigidity, as well as precise surface flatness which is essential for the perfect functioning of the gear train.

DOUBLE BARREL SYSTEM
The double barrel system helps to improve the torque stability over a longer period.
This is achieved by using more rotationnal turns, thereby reducing pressure and friction on the
teeth, the bearings and the pivots, resulting in improved long-term performance.

INTERIOR FLANGE (upper and lower) In carbon fiber; index points filled with approved luminous material.

SPLINE SCREWS IN GRADE 5 TITANIUM FOR THE BRIDGES AND CASE
This permits better control of the torque applied to the screws during assembly. These screws are therefore unaffected by physical manipulation during assembly or disassembly and age well.

CROWN
In grade 5 titanium, with double seal O-ring and collar in Alcryn.

DIAL
In sapphire (thickness: 0.40 mm) with anti-glare treatment (2 sides), protected by 8 silicon braces inserted in the upper and lower grooves.

CRYSTAL
Bezel side: in sapphire (1800 Vickers) with anti-glare treatment (2 sides).
Thickness: 1.20 mm
Case back: in sapphire with anti-glare treatment (2 sides)
Thickness: at the center 1 mm and outer edges 1.73 mm

OTHER FEATURES
Dimensions of movement: 30.30 mm x 32.75 mm x 9.00 mm
Thickness: 6.35 mm
Number of jewels: 62
Barrel arbor – in AP 20 steel
Balance: GLUCYDUR, 3 arms, inertia moment 4.8 mg cm2, angle of lift 53º
Frequency: 28,800 vph (4 Hz)
Balance spring: ELINVAR NIVAROX
Index assembly: Triovis N°2
Shock protection: INCABLOC 908.22.211.100 (transparent)
Escapement wheel jewels: Rubifix (transparent)
Stem with three positions: manual winding, date, hand setting

FINISHING
MOVEMENT
- Bottom plate and bridges in hand-ground titanium, wet sandblasted, PVD treated
- Anglage and polishing by hand
- Locking sections hand polished
- Burnished pivots
- Diamond polished sinks on the bridge side
- Pinions with undercuts
- Sandblasted and rhodium-plated, beveled wheels
STEEL PARTS
- Sapphire blasted surfaces
- Anglage and polishing by hand
- Screw slot and screws beveled and polished with rounded and polished tip.


ASKING PRICE: $ 69995.00 + SHIPPING

PAYMENT: BANK WIRE ONLY. BANK WIRE MUST REFERENCE THE EXACT ITEM THAT YOU ARE PURCHASING

MANY REFERENCES.

MEMBER OF I.W.J.G.

EMAIL ANY QUESTIONS TO: DAVID@CAVALLINOJEWELERS.COM

SHIPPING IS BY PARCELPRO OVERNIGHT FULLY INSURED

BECAUSE OF NUMEROUS FRAUD SCHEMES, WE REQUIRE A COPY OF YOUR DRIVERS LICENSE OR PASSPORT FOR IDENTITY VERIFICATION.

SHIPPING TO VERIFIED ADDRESSES (I.E. THE ADDRESS ON YOUR BANK ACCOUNT OR IDENTIFICATION). ADULT SIGNATURE IS REQUIRED FOR THE DELIVERY.

INTERNATIONAL SHIPPING BY INDIVIDUALIZED QUOTE

ANY IMPORT DUTIES ARE THE SOLE RESPONSIBILITY OF THE BUYER
TITLE TRANSFERS UPON RECEIPT OF PAYMENT
SHIPPING WILL BE WITHIN 48 HOURS OF PAYMENT CLEARING

WE ARE ALWAYS WILLING TO DO A FACE TO FACE DEAL EITHER IN THE LOS ANGELES AREA OR IN COLORADO.

god damn. beauty. maybe if i sell my condo. . .

oh.. my..

I need 69k

i love the design of it

great looking watch, I love RM's collection

SOO SOOO NICE